Neptune

Temporary System

All of the MAXIMUS Portable Wheel Wash Systems are designed with the ability to be relocated at the end of a job or a project. The construction of the system was specifically designed to provide the structure of a permanent system, coupled with the ability to easily relocate the system as needed. The patented structure of the Maximus mobile truck washing equipment eliminates the need for concrete underneath the system.

SYSTEM COMPONENTS:

The wash platform	А. The water recycling and solid separation tank with an automated scraper conveyor
	Б.  The water recycling and solid separation tank WITHOUT an automated scraper conveyor
The water collection chamber
A set of ramps

Option 1: MAXIMUS G Series

Relocatable Gravity Flow System

You will need only two of the components: the wash platform (1) and either 2A or 2B, the water recycling and solid separation tank. Both pieces of the system require excavation so that they can be set inground, but can easily be removed and relocated when the project is completed. The tank with the scraper conveyor (2A) will automatically evacuate the solids as the systems runs; the solids will need to be removed manually from the tank without the scraper conveyor (2B).

Option 2: MAXIMUS P Series

Portable System Without Ramps

This system allows the water recycling tank to be used above ground; however, the wash elements are placed inground and over-sized rock or rumble plates are used to transition from the grade of the road. This system requires the use of water recovery chambers (3) and can be used with a standard tank or with a tank equipped with a scraper conveyor (2A or 2B).

Option 3: MAXIMUS PR Series

Portable System With Ramps

The system is configured using all four of the component pieces and requires no elevation. The system is designed to be operated on any flat surface. The ramps add additional cleaning effect; serving to help shake off solids prior to trucks entering the wash platform and shaking off excess water upon exiting.

The wash platform is 114” wide x 21” deep. The water collection chambers and an additional water pump can be added to the above ground water recycling tank. The wash platform and water collection chamber are set inground and gravel or rumble strips can be added for road access. The large water recycling tank (24’ to 32’ l x 7’ w x 8’ h) is set on the ground adjacent to the system.